How to operate a manual hydraulic pipe bender

With the continuous development of industrial manufacturing, as an important metal processing equipment, the operation method of manual hydraulic pipe bending machine is particularly important. In today's industrial field, mastering the correct operating procedures can not only improve work efficiency, but also ensure safe production. Next, let us learn about the correct operation method of manual hydraulic pipe bending machine.

First of all, before using the manual hydraulic pipe bending machine, the operator should ensure that the machine switch is tightened, and at the same time, lubricate the contact parts between the supporting wheel and the mold and the bent workpiece. Correct execution of this step will help reduce machine wear and extend equipment life.

Secondly, according to the size of the required bending pipe material, select the corresponding bending die and install it on the top of the piston rod. Then, align the corresponding grooves of the two support wheels with the bending mold. Special attention should be paid to the fact that the support wheels should be placed in the holes of the corresponding size on the edge of the wing plate to ensure the symmetry of the position of the support wheels and avoid damage to the mold and machine. pieces.

When the workpiece is in place, cover the upper wing plate, use a fast pump to press the bending die onto the workpiece, and then use a slow pump to press the workpiece to the required angle. After bending, turn off the switch, the working piston will automatically reset, then open the upper wing plate and take out the workpiece.

Through correct operation methods, not only can the normal operation of the equipment and the safety of operators be ensured, but it can also help improve work efficiency and ensure the quality of workpiece processing. Therefore, the correct operating manual and training are crucial. Only in this way can the efficiency and role of the manual hydraulic pipe bending machine be truly exerted. It is hoped that through the careful study and practice of more people, the use of manual hydraulic pipe bending machines can be more efficient and contribute more to industrial manufacturing.